Full Version: Engrave/hold piggy bank on flatbed table

From: Colin (MATROPHY) [#16]
18 Aug 2005
To: logojohn [#14] 18 Aug 2005

By the way - what hole spacing did you use to drill the block - what's the distance center-to-center between the holes?

From: Colin (MATROPHY) [#17]
18 Aug 2005
To: Colin (MATROPHY) [#16] 18 Aug 2005

I know I can measure myself - it looks like 1.5" but if you already know what it is...

From: Stunt Engraver (DGL) [#18]
18 Aug 2005
To: ALL

Thanks to everyone for making this a very informative thread. Between the Bondo molds (and other materials) and the various vise/jig solutions, Colin should be able to tackle this job.

Looks like there are numerous "Stunt Engravers" in our ranks! :-)

From: logojohn [#19]
19 Aug 2005
To: Colin (MATROPHY) [#17] 19 Aug 2005

I used 1.5

I made a layout the size of the block with the holes drawn.
I printed it out and positioned it on the block for drilling.

The holes can be a little off and oversized and still hold the block when the vice is closed.

Show messages: All 1-15 16-19

Full Version: Engrave/hold piggy bank on flatbed table

Back to thread list | Login

© 2024 Project Beehive Forum