Full Version: Gold Embossing

From: Stunt Engraver (DGL) [#7]
 11 Feb 2006
To: Harvey only (HARVEY-ONLY) [#6] 11 Feb 2006

Harvey,

When I remove type from a hotstamping machine, I set it on a metal surface. Cools very quickly.

I set the new line and by the time I put the previous letters back in their case, the new line is ready to go.

There are "crossover" foils that emulate true gold foil.

Any hand-operated hot stamping machine requires an acquired feel for heat, pressure and dwell time.

I only occasionally use the Kingsley machine. Most of the work I do is on a Kwikprint.

When I say "most" of the work, I mean the times I get someone to pop for my $30 minimum charge, which isn't very often.

Perfect! I don't want to go through the motions, for any less than that.

EDITED: 11 Feb 2006 by DGL

From: JimK (JUSTTHE4OFUS) [#8]
 23 Feb 2006
To: ALL

I finally "won" a Kingsley machine on E-Bay this week. Wow, the bidding on these is cut-throat as well as any type fonts that come up. On the good side there are a fair number of them out there for sale at any givin time and they seem to be reliable. I have seen some people buying multiple machines, could be spare parts or stock-piling, interesting. So soon I will at least enter this on an entry level and then go from there. All the ribbon stuff intrigues me.

Thanks all!

Jim

From: Stunt Engraver (DGL) [#9]
 23 Feb 2006
To: JimK (JUSTTHE4OFUS) [#8] 23 Feb 2006

Congratulations Jim!

A new dimension to your already extensive line of services. :-) 

From: MR C (MOSHE) [#10]
 23 Feb 2006
To: Stunt Engraver (DGL) [#9] 23 Feb 2006

Is there a method to "gold stamp" on leather?

Is there someone who sells an attachment (similar to what Signature has)that goes on my rotary engraver that does gold stamping?

From: Stunt Engraver (DGL) [#11]
 23 Feb 2006
To: MR C (MOSHE) [#10] 23 Feb 2006

Mr. C,

I haven't seen the Signature attachment, to know how it works.

Traditionally, gold foil is placed under a heated die, which is applied to the leather with pressure, releasing gold foil in the image of the die.

From: MR C (MOSHE) [#12]
 23 Feb 2006
To: Stunt Engraver (DGL) [#11] 23 Feb 2006

I think there is a heated shank that takes the place of the cutter

From: PenTrophy (PENINSULATROPHY) [#13]
 23 Feb 2006
To: MR C (MOSHE) [#10] 23 Feb 2006

Here is an attachment Newing-Hall used to carry.......maybe it will give you some ideas..

EDITED: 19 Feb 2007 by PENINSULATROPHY

From: MR C (MOSHE) [#14]
 23 Feb 2006
To: PenTrophy (PENINSULATROPHY) [#13] 23 Feb 2006

Whoa!! You guys are great!!!

This forum is faster than a phone call!!

Do you know if this was a cost/labor/time/quality effective piece?

From: PenTrophy (PENINSULATROPHY) [#15]
 23 Feb 2006
To: MR C (MOSHE) [#14] 23 Feb 2006

Like all after market attachments that are rigged to run on someone elses machine, getting the feed rate, heat level and pressure correct would be an ever challenging venture. In otherwords, I don't know........... they did not sell very many I would sepculate, because the letter presses were big when they introduced the attachment.

From: Stunt Engraver (DGL) [#16]
 23 Feb 2006
To: PenTrophy (PENINSULATROPHY) [#13] 23 Feb 2006

Mark,

Pretty slick. I'd never seen that before.

From: Stunt Engraver (DGL) [#17]
 23 Feb 2006
To: MR C (MOSHE) [#14] 23 Feb 2006

quote:
Whoa!! You guys are great!!!

This forum is faster than a phone call!!


We tried to warn you, through the start page. We take our slogan very seriously. :-) 

From: MR C (MOSHE) [#18]
 23 Feb 2006
To: Stunt Engraver (DGL) [#17] 23 Feb 2006

But we did not take the warning that seriously

From: Stunt Engraver (DGL) [#19]
 23 Feb 2006
To: MR C (MOSHE) [#18] 23 Feb 2006

Mr. C,

We have no control over that. All we can do is put the "truth in advertising" out there. :-) 

Show messages: All  1-6  7-19

Back to thread list | Login

© 2024 Project Beehive Forum