Full Version: Laser-eggs

From: Becky (KIAIJANE) [#1]
8 Aug 2006
To: ALL

Hi all!
Anyone ever tried to laser on a blown egg? A blown egg being one that has holes on either end and the yolk and white blown out of it?

Several years ago, I bought a huge box of blown eggs at a yard sale for $5 (don't ask..it involved a little old lady) Anyway, I have never quite figured out what to do with them and wondered if they lasered well?

I have found some sites that say they used a laser on their eggs.

Thanks in advance
Becky

EDITED: 11 Apr 2007 by DGL

From: Dave Jones (DAVERJ) [#2]
8 Aug 2006
To: Becky (KIAIJANE) [#1] 8 Aug 2006

I've seen a few sites showing engraved eggs and saying they are lasered. But they weren't shown by the people that did them. Just people that liked the images. I ran across some of the same images on other sites that said they were engraved with a dremel tool.

On the other hand, I did see an egg shell lasered on the site of an industrial laser company. It was not a full shell, but had the back half removed. I'm guessing because the laser probably blasted through the front and hit the back while out of focus.

No idea what type of laser they used, so it may not be the same wavelength as the typical laser engraver.

If you've got the shells, I'd say give it a shot. (maybe with a sheet of cardboard under it to catch the bits if it doesn't work)

From: Zonas [#3]
8 Aug 2006
To: Becky (KIAIJANE) [#1] 8 Aug 2006

I remembered this from before. ALeta had sent me a picture so I did a search. Go to:
http://www.engravingetc.org/forum/index.php?webtag=EE&msg=3328.7
for more on eggs and fruit.

Zona
Topeka, KS

EDITED: 8 Aug 2006 by DGL

From: Jo (OAAE) [#4]
8 Aug 2006
To: Zonas [#3] 8 Aug 2006

Todd tried it around Easter Time. It didn't stick in my head so it much not have been as great as we thought it would be. But then I don't remember taking a lot of time working with it either.

From: Buzz [#5]
8 Aug 2006
To: Becky (KIAIJANE) [#1] 9 Aug 2006

CBS is now having advertisements lasered on uncooked white eggs using lasers (34 milliseconds to engrave). I company out there has already patented laser marking fruit (I know, I don't understand the patent either)

I have also heard about carving eggs with a laser, seen a couple of samples, but was unsure if it was lasered or ???

Do I sense pumpkin carving reaching an all new level :P

We should start a thread on what have we tried to laser - worked or didn't work?

During the cigar fad, I met a laser owner who told me he did over 100,000 that year personalizing cigars and the boxes they came in. The engraving on the cigar looked great.

From: Becky (KIAIJANE) [#6]
9 Aug 2006
To: Buzz [#5] 9 Aug 2006

Buzz-
I think that's an eggs-ellent idea!! Let's start a thread to see what odd things people have lasered, for what purpose and what the outcome was.
Becky

From: Dave Jones (DAVERJ) [#7]
9 Aug 2006
To: Becky (KIAIJANE) [#6] 9 Aug 2006

I like experimenting, so I'm willing to stick a few odd things into the laser even without having a purpose. :D

From: Vicky (ANDERI) [#8]
9 Apr 2007
To: Dave Jones (DAVERJ) [#7] 9 Apr 2007

I know this thread is a little old, but I thought I'd revive it since I did try lasering a brown blown egg this week-end. Either I was doing something wrong, or this was one tough chicken. My 30W LaserPro required 100%P, 50%S to cut through that egg. Maybe white eggs are easier to laser through? I'll try to remember to take & post a picture of it before it get destroyed.

From: JHayes55 [#9]
9 Apr 2007
To: Vicky (ANDERI) [#8] 9 Apr 2007

Vicky - don't give up - this market has great potential. I just finished my first one myself. I have attached a photo. Please do not make fun of it since it only my first try. I can only hope I get better at this.

EDITED: 16 Apr 2007 by JHAYES55

From: Vicky (ANDERI) [#10]
9 Apr 2007
To: JHayes55 [#9] 10 Apr 2007

:-$ Well, your first try is a darn sight better than mine was! Not sure where the market would be for this sort of thing, though. :S We did it just for fun because of the season, we had family in from out of town and wanted to give them a fun demo, yadda, yadda, yadda. Was your egg as difficult to crack as mine was? Or do white eggs laser more easily than brown? Store bought? Mine came from a "free range" chicken, which might explain why it was so tough. :P

From: Stunt Engraver (DGL) [#11]
10 Apr 2007
To: JHayes55 [#9] 10 Apr 2007

Go to Joe's for breakfast.

Home of the $800 omelet. :P

From: Harvey only (HARVEY-ONLY) [#12]
10 Apr 2007
To: Vicky (ANDERI) [#10] 10 Apr 2007

Eggs vary in thickness, due to breed and the amount of calcium supplements they receive. Free range usually get enough calcium to make a good thick shell.

From: Laser Image (LASER_IMAGE) [#13]
10 Apr 2007
To: JHayes55 [#9] 10 Apr 2007

Are you kidding? You did that with a laser??? 8-O

I would sure like to know how you got an image all the way around the egg????

I think I have used my quota of ? today... I'll have to start on another punctuation mark..........

Gary

...

From: Ozzy Fox (CLIVEGARAWAY) [#14]
10 Apr 2007
To: ALL

JHAYES 55

I'm not sure what the potential is though , I'd be inclined to make sure I had other work , wouldn't want to put all my eggs in one basket. :P I think I get eggsasperated trying to package them, and duck the issue. do you send them Fed Eggspress? :S

Now if that doesn't get a bite from Dave (Stunt Eng), I don't know what will.

seriously what a great first attempt, your imagination is out there.
Well done

cheers Clive.

From: Vicky (ANDERI) [#15]
10 Apr 2007
To: Ozzy Fox (CLIVEGARAWAY) [#14] 10 Apr 2007

quote:

Now if that doesn't get a bite from Dave (Stunt Eng), I don't know what will.

Please don't "egg" him on. These puns are getting a little "fowl". :P

From: Becky (KIAIJANE) [#16]
11 Apr 2007
To: JHayes55 [#9] 11 Apr 2007

Joe-
Did you use your rotary attachment on that? How in the world did you get your design all the way around the circumference of the egg?
Thanks
Becky

From: Vicky (ANDERI) [#17]
11 Apr 2007
To: Becky (KIAIJANE) [#16] 11 Apr 2007

Yes, the rotary attachment would have been used. Eggs are surprisingly tough. We used a little double-sided tape to keep the egg from slipping in the rotary attachment.

From: Rodney Gold (RODNEY_GOLD) [#18]
11 Apr 2007
To: Vicky (ANDERI) [#17] 11 Apr 2007

I cant see how a rotary attachment could have been used on that egg , or in fact , a laser? Im talking about the one in the pic on the stand , maybe I'm missing something here?

EDITED: 11 Apr 2007 by RODNEY_GOLD

From: Stunt Engraver (DGL) [#19]
11 Apr 2007
To: Rodney Gold (RODNEY_GOLD) [#18] 11 Apr 2007

Rodney,

I'm thinking Joe's pulling a belated April Fool's joke.

Not that he isn't a skilled laser operator. :-)

From: Harvey only (HARVEY-ONLY) [#20]
11 Apr 2007
To: Rodney Gold (RODNEY_GOLD) [#18] 11 Apr 2007

I think I saw that picture a few months ago in a thread. Dremel engraved.

Since Stunt let the cat out of the bag...

Show messages: 0-19 20-22

Full Version: Laser-eggs

Back to thread list | Login

© 2024 Project Beehive Forum