Full Version: Remember......

From: Laser Image (LASER_IMAGE) [#32]
 2 Nov 2006
To: LaZerDude (C_BURKE) [#30] 2 Nov 2006

400Watt - I thought 30 would be plenty for most of the things I need to do. Next you'll tell me that my servo motors won't work and I need stepper :'-( 

---

From: Harvey only (HARVEY-ONLY) [#33]
 2 Nov 2006
To: Laser Image (LASER_IMAGE) [#31] 2 Nov 2006

Yes.

---

From: LaZerDude (C_BURKE) [#34]
 2 Nov 2006
To: Laser Image (LASER_IMAGE) [#32] 2 Nov 2006

Gary,
No, you servo motors should be fine as long as you don't try the convex hyperbolic......the concave works fine.........

---

From: GBengraver [#35]
 2 Nov 2006
To: LaZerDude (C_BURKE) [#34] 2 Nov 2006

you servo motors should be fine

How do you know he is a servo motor?
Is it his accent?

Greg

---

From: Peter [#36]
 2 Nov 2006
To: LaZerDude (C_BURKE) [#34] 2 Nov 2006

we've had a massive misfunction with our themagulated hyper extender. As a result all our disticular arlanthiams have been burnt.

We now have to replace the particulant nano expander and re calibrate the thermolaterizer...otherwize it will just burn holes straight thru the metal...as we all know..

does everyone concur ?

---

From: LaZerDude (C_BURKE) [#37]
 2 Nov 2006
To: Peter [#36] 3 Nov 2006

Peter, Whatever would you do without me.......I know that you know that I know that you know that you know that you must be EXTREMELY careful whe replacing the particulant nano expander, because if you do NOT take special note to know the correct pressure applied to the particulant, during recalibration, it is likely that it could become very parallent there by resulting in massive burns to the testiculant partition of the thermolaterizer its self, reducing the potency of the entire process. I KNOW that you know that I know that you know that. You DO know that don't you?

---

From: Engravin' Dave (DATAKES) [#38]
 2 Nov 2006
To: LaZerDude (C_BURKE) [#37] 3 Nov 2006

Wear your safety goggles. :S 

---

From: Dave Jones (DAVERJ) [#39]
 2 Nov 2006
To: Peter [#36] 3 Nov 2006

Sounds like you just need to replace the flux capacitor

---

From: Harvey only (HARVEY-ONLY) [#40]
 3 Nov 2006
To: Peter [#36] 3 Nov 2006

Told you that you should have collumated the particle beam. Now you are in a pile of burned brown stuff.

---

From: LaZerDude (C_BURKE) [#41]
 3 Nov 2006
To: Engravin' Dave (DATAKES) [#38] 3 Nov 2006

I "Know" ;-) 

---

From: Engravin' Dave (DATAKES) [#42]
 3 Nov 2006
To: LaZerDude (C_BURKE) [#41] 3 Nov 2006

Did you learn that from Peter?

---

From: LaZerDude (C_BURKE) [#43]
 3 Nov 2006
To: Engravin' Dave (DATAKES) [#42] 3 Nov 2006

David,

Peter knows, that you know that I know that he knows that everying I know, you know that he knows that I learned from him. You know?

---

From: Engravin' Dave (DATAKES) [#44]
 3 Nov 2006
To: LaZerDude (C_BURKE) [#43] 3 Nov 2006

No know, Kemo Sabe.

---

From: Stunt Engraver (DGL) [#45]
 3 Nov 2006
To: Engravin' Dave (DATAKES) [#44] 3 Nov 2006

Beats Kemo Therapy. :-$ 

---

From: Engravin' Dave (DATAKES) [#46]
 3 Nov 2006
To: Stunt Engraver (DGL) [#45] 3 Nov 2006

Does this thread still qualify to be under the General Discussion folder? Sheesh!

EDITED: 3 Nov 2006 by DATAKES

---

From: Stunt Engraver (DGL) [#47]
 3 Nov 2006
To: Engravin' Dave (DATAKES) [#46] 3 Nov 2006

Presto changeo, it's in "Topic of Your Choice."

---

From: Engravin' Dave (DATAKES) [#48]
 3 Nov 2006
To: Stunt Engraver (DGL) [#47] 3 Nov 2006

Now we can really cut loose. Chuck will really be uninhibited now. :D 

---

From: Stunt Engraver (DGL) [#49]
 3 Nov 2006
To: Engravin' Dave (DATAKES) [#48] 3 Nov 2006

David,

I thought the discussion was about as general as it could get, not that I was following too closely. :-) 

---

From: LaZerDude (C_BURKE) [#50]
 3 Nov 2006
To: Stunt Engraver (DGL) [#49] 3 Nov 2006

Generally speaking David, I find that speaking in generalities, generally, creates journalistic generalizations of a more general nature. You KNOW?

---

From: Peter [#51]
 3 Nov 2006
To: LaZerDude (C_BURKE) [#37] 3 Nov 2006

Thats the point of this forum Chuck !

I might have a pretty good knowledge about particulant nano expanders....but its all the other knowledge ( all the in between really important stuff, that I gleen from you and the rest of the guys...that allows me to shine.

This is the best forum ever...

nanoo, nanoo ! :P  :S  B-) 

EDITED: 3 Nov 2006 by PETER

---

Show messages:  1-11  12-31  32-51

Back to thread list | Login

© 2025 Project Beehive Forum