Full Version: Font for single line vectoring
From: Bill (BILL_S) [#7]
15 Nov 2006
To: Pedaler (ROYBREWER) [#6] 16 Nov 2006
Thanks Roy.
Unfortunately, I don't have a mechanical engraver so I don't have the fonts. I appreciate your taking the time to do this for me. The font that you picked will work fine for me.
Bill
From: Bill (BILL_S) [#8]
5 Dec 2006
To: Pedaler (ROYBREWER) [#6] 5 Dec 2006
Roy,
Now my customer wants to add the words "TWENTYNINE PALMS" (no quotes, all caps) and "2/7" (again, no quotes) in the same font . Can I impose on you to *translate* those into the single line font?
Thanks,
Bill
From: Pedaler (ROYBREWER) [#9]
5 Dec 2006
To: Bill (BILL_S) [#8] 6 Dec 2006
See if the attached will work.
I can't remember how large I made the other. Let me know if this doesn't work.
(Xenetech, gothic.fnt)
EDITED: 3 Apr 2007 by ROYBREWER
From: Bill (BILL_S) [#10]
6 Dec 2006
To: Pedaler (ROYBREWER) [#9] 7 Dec 2006
Thank you, Roy. I can resize it to fit. That is what I did for the OOHRAH. In fact, on that word they wanted progressively larger letters so I had to break it into individual letters, size them, and place them back together to make a word. >.< This should be easier. :D
Bill
From: Bill (BILL_S) [#11]
3 Apr 2007
To: Pedaler (ROYBREWER) [#9] 3 Apr 2007
I need to impose on you once again. My customer now wants another plaque with some additional wording in the Xenetech, gothic.fnt. Can you provide me the following text in that font and in a cdr format?
FOX COMPANY. (Yes, there is a period)
Illegitimus Non Corborundum
ILLEGITIMUS NON CORBORUNDUM
Thanks,
Bill
From: Pedaler (ROYBREWER) [#12]
3 Apr 2007
To: Bill (BILL_S) [#11] 3 Apr 2007
I've attached a Corel 9 file which has three separate lines(curves).
I couldn't recall how large we made them before, but you should be able to scale to fit what you need. Let me know if this isn't quite what you need
From: Bill (BILL_S) [#13]
3 Apr 2007
To: Pedaler (ROYBREWER) [#12] 4 Apr 2007
Thanks, Roy.
I really appreciate the help.
Bill