Full Version: Help Needed After Corel 9 Re-Install

From: Engravin' Dave (DATAKES) [#6]
16 Dec 2006
To: gt350ed [#5] 16 Dec 2006

I wasn't ready to upgrade either until I tried the bitmap to vector feature. If there were ever a time to upgrade, X3 would be the version. I made the upgrade from 10 to 12, which was pretty anticlimactic, but X3 is like getting a new toy in the toybox. :-)

EDITED: 17 Dec 2006 by DATAKES

From: Harvey only (HARVEY-ONLY) [#7]
16 Dec 2006
To: gt350ed [#5] 17 Dec 2006

Since it is a new install after removal of the old corrupt version, it might still have some of the old settings left somewhere that is giving a problem. Hold the F8 key while booting Corel. That will force it to reset all settings to the defaults. That might do the trick.

From: Mike (MIKEN) [#8]
16 Dec 2006
To: gt350ed [#7] 17 Dec 2006

Ed

I forgot to mention to be sure to install any Vers. 9 updates that may have been issued.

I agree with Dave. X3 has a lot to offer and though it took me a while to wean myself off of 11, I use X3 exclusively now.

From: Mike (MIKEN) [#9]
17 Dec 2006
To: gt350ed [#8] 18 Dec 2006

Ed

Here's something you might try before you uninstall and re-install. If you have a corrupted file within Corel your chances of finding it are slim. The Corel people gave me a work around for this problem. It has to be repeated from time to time.

Close all programs.
Go to start, run and type in the following
%appdata% enter
select the Corel file
right click on corel 9 and delete it
restart the pc (a new file will replace the old)

For some reason the corrupted file is temporarily repaired and you can continue your work. It will eventually reappear.

From: Dave (MT_DAVE) [#10]
17 Dec 2006
To: Mike (MIKEN) [#9] 18 Dec 2006

Ed,

If none of these suggestions work, you might want to post your question here http://www.unleash.com/forums/default.asp

It is Foster Coburn's Corel forum

Good luck and here is wishing the two of you a very Merry Christmas!

Dave & Lynn

Show messages: All 1-5 6-10

Full Version: Help Needed After Corel 9 Re-Install

Back to thread list | Login

© 2025 Project Beehive Forum