Full Version: Reflective ADA

From: Harvey only (HARVEY-ONLY) [#3]
 16 Dec 2006
To: Zonas [#1] 17 Dec 2006

If you mean the raised dots being reflective, maybe they are miniature stainless steel ball bearings. Now tell me why Braille must be able to be seen from a distance. It seems quite counter-intuitive.

Edit: Now I get it, they want the letters 'EXIT' to be raised and reflective. Duh.

EDITED: 16 Dec 2006 by HARVEY-ONLY

From: gravure (INFOGRAVE) [#4]
 16 Dec 2006
To: Zonas [#1] 17 Dec 2006

Hi Zona,

I would ask the same question as Peter did, is it photoluminescent?
The law in the US that has been in place since 911 is the material is to be photoluminescent. I have done some testing with a company that produces evacuation signage and they had to add the ADA signs to accompany their other signage. Some of the material has a metal backing, plastic backing and just a film. Of course, if you are working with the raster method you would need a material that would accept the braille bead. I haven't tried IPI material, I have had it in stock for some time for other signage applications. I am told that the length of time that the material illuminates should not be less than four (4) hours.

Glenn
Mattronic/Inofgrave
Montréal

From: sprinter [#5]
 16 Dec 2006
To: gravure (INFOGRAVE) [#4] 17 Dec 2006

The real problem is most of the laws for photoluminescent signs have been on local levels. The ADA sign laws haven't been changed in a few years, it seems they can't agree on what should be done. In general the ADA sign movement has lost any momentum that it once had and enforcement is non existent on the federal, state and local levels due to budget cuts.

From: Zonas [#6]
 17 Dec 2006
To: gravure (INFOGRAVE) [#4] 17 Dec 2006

I'm sure they mean photoluminescent but call it reflective. I tried calling the ADA hotline, but they were closed Thursday, Dec. 14 and I wasn't available on Friday. I will try calling them again on Monday, as I was unable to find any law with guidelines for photoluminescent/ADA signs.

Would you mind emailing me at zonas at earthlink dot net (remove the ats and dots) as I'd like some more information on thickiness of material, applying, etc.

Thanks, I knew somebody would know what I needed even though I didn't know :S

Zona
Zona's Engraved Creations
Topeka, KS

From: Jim (PUZZLEHEAD) [#7]
 17 Dec 2006
To: Zonas [#1] 17 Dec 2006

IPI makes a glow in the dark plastic, but I have not seen it advertised in 1/32" thickness and I am not sure, but I don't think it complies with the NYC requirements. This company seems to have the product you need: http://www.rtpcompany.com/products/sheet/glow.htm

From: gravure (INFOGRAVE) [#8]
 19 Dec 2006
To: Zonas [#1] 19 Dec 2006

Hi Zona,

I am sorry for replying sooner, I was on the road working since your last post. Give me your phone number and I can call you. I only have lmited access to my PC as I am on the road for the rest of this week. I would be happy to call you as I have time between sales calls.

Regards,
Glenn
Mattronic/Infograve

Show messages: All  1-2  3-8

Back to thread list | Login

© 2024 Project Beehive Forum