Full Version: CorelDraw
From: Harvey only (HARVEY-ONLY) [#5]
20 Feb 2007
To: MR C (MOSHE) [#3] 20 Feb 2007
If you want to increase the space between two specific lines it is easy.
Put in a carriage return, then type a letter. Highlight the letter and set it to an appropriate line height for the space, then set the fill color to white. (Sometimes a space will work instead of the letter, sometimes not.)
From: MR C (MOSHE) [#6]
20 Feb 2007
To: Harvey only (HARVEY-ONLY) [#5] 20 Feb 2007
From: Ron (WOODKING) [#7]
21 Feb 2007
To: MR C (MOSHE) [#1] 22 Feb 2007
Hi Mr C
I've found the quickest way to increase the spacing is to select the text you want to adjust then select your shape tool. Small boxes will appear by each letter. Select the text you want to move (line/lines) and use your up/down key to move the text. Movement will be in incriments of your nudge setting. I have mine set at .01 which makes it easy to tap the arrow key and stop when the spacing is where I want it.
This method can also be used to kern between letters.
Ron
Recognition Unlimited
From: Joe (SMITTY61) [#8]
21 Feb 2007
To: MR C (MOSHE) [#1] 22 Feb 2007