Full Version: XP/Corel X3 Print lag

From: BrianC (INKSQUIRTER) [#11]
 30 Mar 2007
To: laserman (MIKEMAC) [#8] 30 Mar 2007

I have done that Mike.....even my computer guy is not sure what is causing this....

From: BrianC (INKSQUIRTER) [#12]
 30 Mar 2007
To: Mike (MIKEHUNTER) [#10] 30 Mar 2007

I have no delay in ver 9 at all.........just X3. It's so frustrating because all these years of engraving I've just hit the button and the machines go right to work (except the Wizzard of course) :'-(

From: laserman (MIKEMAC) [#13]
 30 Mar 2007
To: BrianC (INKSQUIRTER) [#11] 30 Mar 2007

Brian,

Try the defaults button in the driver if that does not work try un installing the driver re boot the computer and then re install the driver.

You are using 1.07M version correct?

From: Hermes (HERMESSANDOVAL) [#14]
 31 Mar 2007
To: BrianC (INKSQUIRTER) [#1] 31 Mar 2007

You can also try a different printer like a laser or deskjet printer to see if the driver has anything to do with that. I have X3 but work mainly with 12 due to some stability issues. I also don't think the improvements on X3 are worth the increased consumption of the computer's resources.

From: logojohn [#15]
 31 Mar 2007
To: Hermes (HERMESSANDOVAL) [#14] 5 Apr 2007

quote:
You can also try a different printer like a laser or deskjet printer


I don't use coreldraw much for the laser engraver.

When sending to the c88 sublimation or Konica Minolta OEM laser printer I hadn't noticed slowness before doing the last 2 coreldraw X3 updates.

I had some customer art with a lot of objects and I fit 15 on a page.
I first tried the sublimation printer and it never did print.

I got distracted after sending to the laser printer and thought it wasn't going to work. Many minutes later it started printing. I needed multiple copies and from the print preview repeating the same thing one at a time started printed much quicker.

Show messages: All  1-10  11-15

Back to thread list | Login

© 2024 Project Beehive Forum