From: UncleSteve [#12]
5 Apr 2007
To: Holly (GRIZGIRLS) [#10] 5 Apr 2007
quote:
They checked it out and found the vomit-smelling odor was a result of the wood getting wet
Just between you and me, I begin to smell the same way when I've had too much alcohol poured on/in me at a bar! 8-O
From: Larry B (PALMETTO) [#13]
6 Apr 2007
To: UncleSteve [#12] 6 Apr 2007
Me too Uncle Steve. Could be the real thing too!! :S
From: dun_it (OREGON) [#14]
17 Apr 2007
To: ALL
I cut and engrave 1/8 luan 2-3 days a week. It cuts fast, I use a slightly higher and slower setting than I would with 1/16 plastic or about the same as filon (smooth sheet fiberglass). I have no problem with either voids or delamanination. We use about as cheap a grade as we can get away with. Engrave with about twice the power as you would plastic and you should like what you see. If you have a cabinet shop in the area 5/32 birch, cherry, and maple scraps also engrave nicely. For test pieces scraps and odds and ends sometimes end up specialty proto types, watch who you show though I got stuck doing 600 Conastoga wagon wheels one time cause I said that I could come up with a design for someone else.
Show messages: All
1-11
12-14