Full Version: Granite vs Marble ? Settings etc.

From: Larry B (PALMETTO) [#14]
23 Apr 2007
To: Mikey (MIKE2449) [#12] 24 Apr 2007

Thanks Mike. I printed your reply. As you know, I'm still experimenting with this stuff. I haven't engraved any of the granite yet, but I think I am going to take all the advice I have been given and test each one on the granite I have. That will give me a good idea of which works best, at least on this particular stone. Thanks again.

From: Mikey (MIKE2449) [#15]
24 Apr 2007
To: Larry B (PALMETTO) [#14] 25 Apr 2007

Larry:
Use every sq in of the stone. Below is a pic of a piece of stone I used to test on--it is black absolute and has since been completely filled.
Good luck.
Mike

From: Larry B (PALMETTO) [#16]
25 Apr 2007
To: Mikey (MIKE2449) [#15] 25 Apr 2007

Mike:
I ran one of these big pieces of granite this morning. I put a large photo that I made of some boats on it, 10" x 22". I used a setting of 100 speed-44 power, took 26 minutes. It turned out beautifully. I ran the whole thing, photo, text and all at 300dpi. This setting was recommended by a guy in the Sawmill Creek forum that has an Epilog 40w, same as mine. It worked great. Thanks for all your help and advice, I appreciate it. I'll post a photo when I can get one made.

EDITED: 25 Apr 2007 by PALMETTO

Show messages: All 1-13 14-16

Full Version: Granite vs Marble ? Settings etc.

Back to thread list | Login

© 2024 Project Beehive Forum