Folder Advertising/Buy/SellPreferred Supplier Banner Ads


Warning Press Ctrl+Enter to quickly submit your post
Quick Reply  
✏✏✏✏✏✏✏✏✏✏
 
 
  

Previous
Next
 From:  Queen (DBOZ)
 To:  Stunt Engraver (DGL) 
3670.24 In reply to 3670.23 

Thanks David,

I must admit, as computer literate as I am in many areas, it seems like some of the forum features are new to me, so hopefully you have received the banner ad in a format you can use. If not, let me know and I will resend it.

Yes, I would be interested in writing for your site. Currently, I write monthly articles for ARA, but have no exclusivity with them. I also write for our website, www.usedlasers.com, and occasionally for www.signindustry.com, and Marking industry Magazine. I am totally independent and have no contractual commitments with any of them.

I welcome your ideas and input and look forward to your reply.

Diane C. Bosworth
523 Knollwood Dr.
Hudson, WI 54016
www.usedlasers.com

 

Previous
Next
 From:  Stunt Engraver (DGL)
 To:  Queen (DBOZ) 
3670.25 In reply to 3670.24 
Diane,

I sent your attachment to John Fish. We'll get that going for you.

Thank you for offering to write some articles.

Like you, I'm a firm believer in remaining a free agent, when it comes to writing. I have some articles up my sleeve, but I'm limited to my areas of expertise.

It's one of the reasons I'm establishing the subscripton-based site.

Nothing like "Greenbacks" to spur authors into action. :-) 

We can talk turkey on that issue later. For now, I'd just like to thank you for making such a generous offer to our members.

All the best,

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

 

Previous
Next
 From:  Queen (DBOZ)
 To:  Stunt Engraver (DGL) 
3670.26 In reply to 3670.25 
Thanks David and Good luck in your future endeavors. Let us know what we can do to help.

Diane C. Bosworth
523 Knollwood Dr.
Hudson, WI 54016
www.usedlasers.com

 

Previous
Next
 From:  Da Big Fish (JOHNFISH)
 To:  Queen (DBOZ) 
3670.27 In reply to 3670.26 

I have your banner in the rotation.

Hudson, Wi. is my old stomping grounds. Lots of good memories from there. I lived in Mpls/St. Paul for about 20 years, born and raised in Hibbing, Mn.

May all your dreams come true.

Bad Fish

"If you give someone a program, you will frustrate them for a day;
if you teach them how to program, you will frustrate them for a lifetime."


Previous
Next
 From:  Stunt Engraver (DGL)
 To:  Queen (DBOZ) 
3670.28 In reply to 3670.26 
Diane,

John asked me if your offer requires a purchase.

If not, we'll take as many Corel Suites as you have. :P 

If you want to revise the ad, we'll get it handled for you.

Thanks again,

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

 

Previous
Next
 From:  John (ICTJOHN)
 To:  Da Big Fish (JOHNFISH) 
3670.29 In reply to 3670.27 

John,

One of my daughters lived in Hibbing (her mother still does). What a small world, I understand it is the home of the Greyhound Bus Museum & Bob Dylan. The one time I was there I didn't see much room for anything more (he, he!) My daughter is now going to Northwestern College in St.Paul.

 

Previous
Next
 From:  Da Big Fish (JOHNFISH)
 To:  John (ICTJOHN) 
3670.30 In reply to 3670.29 

Last I lived there was 1977 and I haven't spent much time there since, my last connection with Hibbing was my mom who passed away in 1998.

The main things I hear when I mention Hibbing is Bob Dylan (who actually was born in Duluth, but grew up in Hibbing), or "It's really cold up there isn't it...." It's nice to hear something else, though I think the Greyhound Museum is in Virginia, Mn. Maybe not....

Bad Fish

"If you give someone a program, you will frustrate them for a day;
if you teach them how to program, you will frustrate them for a lifetime."


Previous
Next
 From:  UncleSteve
 To:  Stunt Engraver (DGL) 
3670.31 In reply to 3670.28 
David,

As I remember the original post, it was with the purchase of any engraver....

"Genius ain't anything more than elegant common sense." Josh Billings
 

Previous
Next
 From:  Stunt Engraver (DGL)
 To:  UncleSteve 
3670.32 In reply to 3670.31 

Steve,

That's exaxctly right. I was only giving Diane a hard time.

I'm sure they'll revise the ad.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 12 May 2006 by DGL

 

Previous
Next
 From:  UncleSteve
 To:  Stunt Engraver (DGL) 
3670.33 In reply to 3670.32 
Ah! I thought the years and fumes may have affected your memory... (devil) 

"Genius ain't anything more than elegant common sense." Josh Billings
 

Previous
Next
 From:  William Desrochers (DRAKESIS)
 To:  Stunt Engraver (DGL) 
3670.34 In reply to 3670.1 

Something that I've notice, when It was said that the banners were in rotation. I saw no banners?

I'vetried everything in zonealarm & adblockplus in firefox to unblock, but no go? Anyone have any suggestions?



William Desrochers
Excalibur Creations & Recognition
"Cutting Edge of Quality & Design"
www.excaliburcreations.com
 

Previous
Next
 From:  Dave Jones (DAVERJ)
 To:  William Desrochers (DRAKESIS) 
3670.35 In reply to 3670.34 
Do you have Norton Internet Security? It will block any image that contains certain words in their names (such as "ad", "banner", etc...).
 

Previous
Next
 From:  William Desrochers (DRAKESIS)
 To:  Dave Jones (DAVERJ) 
3670.36 In reply to 3670.35 
no, I'm using Zonealarm & adblockplus in firefox. I have remove the options to block parts of the site for banner & ads. But I still don't see any banners?


William Desrochers
Excalibur Creations & Recognition
"Cutting Edge of Quality & Design"
www.excaliburcreations.com
 

Previous
Next
 From:  William Desrochers (DRAKESIS)
 To:  Dave Jones (DAVERJ) 
3670.37 In reply to 3670.35 
Ok, I've narrowed it down to Firefox as I can now see the banners in IE, & Opera


William Desrochers
Excalibur Creations & Recognition
"Cutting Edge of Quality & Design"
www.excaliburcreations.com
 

Previous
Next
 From:  Dave Jones (DAVERJ)
 To:  William Desrochers (DRAKESIS) 
3670.38 In reply to 3670.37 
In Firefox, go into Tools > Options > Content and just below the "Load Images" checkbox (which should be checked), make sure that the "for the originating web site only" is not checked.
 

Previous
Next
 From:  William Desrochers (DRAKESIS)
 To:  Dave Jones (DAVERJ) 
3670.39 In reply to 3670.38 

I already thought of that, and its not checked!

I got both engravingetc.org & siciwi.com in my safe list, but for some strange reason the images are not showing?



William Desrochers
Excalibur Creations & Recognition
"Cutting Edge of Quality & Design"
www.excaliburcreations.com
 

Previous
Next
 From:  Dave Jones (DAVERJ)
 To:  William Desrochers (DRAKESIS) 
3670.40 In reply to 3670.39 
When you add siciwi.com to your safe list, are you doing it without the "www"? The URL I'm seeing for the banners has no www on it.
 

Previous
Next
 From:  William Desrochers (DRAKESIS)
 To:  Dave Jones (DAVERJ) 
3670.41 In reply to 3670.40 

Dave, at the moment i have it without the "www". I have tried with them and no go. I also notice that i can see the banners when i save the page for offline and open it in Firefox?

Am I the only one with the problem? Does anyone else here use firefox?



William Desrochers
Excalibur Creations & Recognition
"Cutting Edge of Quality & Design"
www.excaliburcreations.com
 

Previous
Next
 From:  Dave Jones (DAVERJ)
 To:  William Desrochers (DRAKESIS) 
3670.42 In reply to 3670.41 
I'm using Firefox 1.5.0.2 and I see the banners just fine.
 

Previous
Next
 From:  William Desrochers (DRAKESIS)
 To:  Dave Jones (DAVERJ) 
3670.43 In reply to 3670.42 

I'm using Firefox 1.5.0.3 maybe thats the problem!

I can call the image prefectly when I change the code to

<DIV style="background: url('http://siciwi.com/adimages/chewbarka.jpg'); width: 468px; height: 60px;" alt="" title=""></DIV>



William Desrochers
Excalibur Creations & Recognition
"Cutting Edge of Quality & Design"
www.excaliburcreations.com

EDITED: 13 May 2006 by DRAKESIS

 
 
   
 

Show messages:  1-3  4-23  24-43  44-63  64-83  84-103  …  164-179

Rate my interest:

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 |  FAQ |  Docs |  Support |  Donate! ©2002 - 2024 Project Beehive Forum

Forum Stats