Preferred Supplier Banner Ads - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

✏✏✏✏✏✏✏✏✏✏

From:	Stunt Engraver (DGL)	1 May 2006
To:	Carl (CSEWELL)	9 of 179

3670.9 In reply to 3670.8

Carl,

We gleefully welcome your offer. Thank you. :-)

The UID market, from what I've read in EJ, is set to explode in the near future.

I sheepishly have to admit to not having seen your EJ article, although I've seen several articles, on the subject, penned by Stephen Spence.

Not only do we welcome your exclusive offer to our members, but when you find time, we'd love to hear more about the burgeoning UID market and how our members can take advantage of what it has to offer.

You sound like a prime contender for a Teleseminar, which if you haven't followed that thread, is a recorded interview, which can be listened to, by forum members at their leisure.

Thanks again,

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 1 May 2006 by DGL

From:	UncleSteve	1 May 2006
To:	Stunt Engraver (DGL)	10 of 179

3670.10 In reply to 3670.9
UID, UID, UID! NOT IUD! (devil) "Genius ain't anything more than elegant common sense." Josh Billings

From:	Stunt Engraver (DGL)	1 May 2006
To:	UncleSteve	11 of 179

3670.11 In reply to 3670.10
Steve, That may be another burgeoning industry, but I doubt we'll base a TeleSeminar on it. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Carl (CSEWELL)	2 May 2006
To:	Stunt Engraver (DGL)	12 of 179

3670.12 In reply to 3670.9
quote: we'd love to hear more about the burgeoning UID market and how our members can take advantage of what it has to offer. Sorry, I don't participate in nor do I follow the UID market, so I don't think I'd have anything to offer in that regard. The one article I wrote for EJ was on the data format for Data Matrix symbols that are one component of the UID initiative. There are also links on the EJ site to my website with my CreateADMx software and also a special page I developed just for EJ on creating UID compliant Data Matrix symbols. You certainly don't need to buy my CreateADMx software to participate in the UID market, as long as the on-line version is up-and-running (7 years now?), but the Windows version does have more to offer. And there are certainly a host of other products that can be purchased to participate in the UID market. I spent many years employed by a vision company as the engineering lead at their R&D lab producing (DPM - direct part marking, no labels) Data Matrix symbols on just about every substrate imaginable, using just about every process imaginable (the company claimed 140 something processes, but I never took the time to count), either directly or through technology partners. I had the advantage of producing and reading/evaluating Data Matrix symbols with direct access to both sides of the equation: marking and reading. My software, CreateADMx, was created after I left that company as a personal challenge. It has the properties that I would have wanted/needed/used while I was still actively involved in the Data Matrix symbology (and not from an end-user standpoint). I certainly don't make a living off the sales from my software. The market segment that I wrote CreateDMX for is extremely small. I knew going into development that I would not and could not even begin to recoup a portion of my investment in development. As time permits, I could certainly attempt to answer any questions regarding UID and Data Matrix, which I have been doing through my website for many, many, years. However, my information would be dated in both areas. Guntersville Laser Engraving Guntersville, AL 35976 www.GuntersvilleLaser.com

From:	Stunt Engraver (DGL)	2 May 2006
To:	Carl (CSEWELL)	13 of 179

3670.13 In reply to 3670.12
Carl, Thank you for the clarification. Please create a banner ad, with a mention of your special EE offer. We welcome you as a preferred supplier. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	wisker (OUTDOORS-N-MORE)	2 May 2006
To:	Chewbarka	14 of 179

3670.14 In reply to 3670.7

Frank,

Are you able to handle an order of 800 of your business card (3.5 X 2) tags. Waiting for our pool comittee to decide. Will need 200 each of red, blue, gold and green. I hate HOA's, it takes waay too long for the decisions to be made. Anyway let me know. By the way, your tags are great, I think I've done over a 1000 of them, the highschoolers are eating them up. teachers also.

Jody

Outdoors-N-More
Small manufacturer of outdoor and indoor wood furniture, military display case and wood laser engraving.

From:	Chewbarka	3 May 2006
To:	wisker (OUTDOORS-N-MORE)	15 of 179

3670.15 In reply to 3670.14
Hi Jody I have the Business Cards in stock, the price is .52 each and a 15% discount because you are a member of this forum. Blue Red Gold Green Black Purple Frank www.chewbarka.com

From:	Stunt Engraver (DGL)	3 May 2006
To:	ALL	16 of 179

3670.16
Look at Frank go! The rest of you would-be, preferred suppliers, please take your time and do what you want. You are absolutely under no obligation to participate in our Quid Pro Quo program. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA
EDITED: 3 May 2006 by DGL

From:	wisker (OUTDOORS-N-MORE)	3 May 2006
To:	Chewbarka	17 of 179

3670.17 In reply to 3670.15

Frank,

Thanks for the update, I should know in a few days then I'll get in touch.

Jody

Outdoors-N-More
Small manufacturer of outdoor and indoor wood furniture, military display case and wood laser engraving.

From:	Stunt Engraver (DGL)	11 May 2006
To:	ALL	18 of 179

3670.18
Just a reminder to those who have responded to the preferred supplier offer: Get those graphics to me and we'll get you into the rotation of banner ads, that you see at the top of this page. dglengraving (at) adelphia (dot) net David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Da Big Fish (JOHNFISH)	11 May 2006
To:	Chewbarka	19 of 179

3670.19 In reply to 3670.15
Sorry about the delay in getting you into the rotation, I now understand what David wants, and can add banner ads very quickly. "If you give someone a program, you will frustrate them for a day; if you teach them how to program, you will frustrate them for a lifetime."

From:	Chewbarka	11 May 2006
To:	Da Big Fish (JOHNFISH)	20 of 179

3670.20 In reply to 3670.19
Thank You! Frank

From:	Stunt Engraver (DGL)	11 May 2006
To:	Da Big Fish (JOHNFISH)	21 of 179

3670.21 In reply to 3670.19
Thank you John. I know this is a small departure from what we originally planned, but I think it's time we give these good folks the recognition they deserve. Very generous offers to our members. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Queen (DBOZ)	12 May 2006
To:	Stunt Engraver (DGL)	22 of 179

3670.22 In reply to 3670.20

David,

It should be attached to this (I hope)

Diane C. Bosworth
523 Knollwood Dr.
Hudson, WI 54016
www.usedlasers.com

From:	Stunt Engraver (DGL)	12 May 2006
To:	Queen (DBOZ)	23 of 179

3670.23 In reply to 3670.22
Thank you Diane. I'll have John Fish place you in the rotation. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Queen (DBOZ)	12 May 2006
To:	Stunt Engraver (DGL)	24 of 179

3670.24 In reply to 3670.23

Thanks David,

I must admit, as computer literate as I am in many areas, it seems like some of the forum features are new to me, so hopefully you have received the banner ad in a format you can use. If not, let me know and I will resend it.

Yes, I would be interested in writing for your site. Currently, I write monthly articles for ARA, but have no exclusivity with them. I also write for our website, www.usedlasers.com, and occasionally for www.signindustry.com, and Marking industry Magazine. I am totally independent and have no contractual commitments with any of them.

I welcome your ideas and input and look forward to your reply.

Diane C. Bosworth
523 Knollwood Dr.
Hudson, WI 54016
www.usedlasers.com

From:	Stunt Engraver (DGL)	12 May 2006
To:	Queen (DBOZ)	25 of 179

3670.25 In reply to 3670.24
Diane, I sent your attachment to John Fish. We'll get that going for you. Thank you for offering to write some articles. Like you, I'm a firm believer in remaining a free agent, when it comes to writing. I have some articles up my sleeve, but I'm limited to my areas of expertise. It's one of the reasons I'm establishing the subscripton-based site. Nothing like "Greenbacks" to spur authors into action. :-) We can talk turkey on that issue later. For now, I'd just like to thank you for making such a generous offer to our members. All the best, David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Queen (DBOZ)	12 May 2006
To:	Stunt Engraver (DGL)	26 of 179

3670.26 In reply to 3670.25
Thanks David and Good luck in your future endeavors. Let us know what we can do to help. Diane C. Bosworth 523 Knollwood Dr. Hudson, WI 54016 www.usedlasers.com

From:	Da Big Fish (JOHNFISH)	12 May 2006
To:	Queen (DBOZ)	27 of 179

3670.27 In reply to 3670.26

I have your banner in the rotation.

Hudson, Wi. is my old stomping grounds. Lots of good memories from there. I lived in Mpls/St. Paul for about 20 years, born and raised in Hibbing, Mn.

May all your dreams come true.

"If you give someone a program, you will frustrate them for a day;
if you teach them how to program, you will frustrate them for a lifetime."

From:	Stunt Engraver (DGL)	12 May 2006
To:	Queen (DBOZ)	28 of 179

3670.28 In reply to 3670.26
Diane, John asked me if your offer requires a purchase. If not, we'll take as many Corel Suites as you have. :P If you want to revise the ad, we'll get it handled for you. Thanks again, David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

Show messages: 1-8 9-28 29-48 49-68 69-88 … 169-179

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!