gold foil - Engraving Etc. Forum

<body> <h1>Full Version: <a href="https://www.engravingetc.org:443/archive/index.php?webtag=EE&msg=1389.2">gold foil</a></h1><a name="a1389_2"></a><p><b>From: Stunt Engraver (DGL)</b> [<a href="lmessages.php?webtag=EE&msg=1389.2">#2</a>]<br /> 2 Jun 2005<br /><b>To: Peter</b> [<a href="lmessages.php?webtag=EE&msg=1389.1">#1</a>] 2 Jun 2005</p> <p>Peter,</p> <p>Matte board takes a gold foil image very well. The process isn't very involved:</p> <p>1) Create a die from camera-ready artwork. The dies are usually made from magnesium, using an acid etching process. Usually, professionally done (outsourced).</p> <p>2) Attach the die to the heat platen of a hot stamping machine. Heat to approx. 200 degrees. Gold generally needs less heat than other colors.</p> <p>3) Place matte board in position.</p> <p>4) Place gold foil between the die and the matte board, either by placing a roll of foil in an auto-advance mechanism, or by manually placing a piece on the matte board.</p> <p>5) Print, by pulling the handle or pressing the footswitch of a pneumatically-operated machine.</p> <hr /><p align="center">Show messages: <a href="lmessages.php?webtag=EE&msg=1389.1">All</a>  <a href="lmessages.php?webtag=EE&msg=1389.1">1</a>  2</p> <h4><a href="lthread_list.php?webtag=EE">Back to thread list</a> | <a href="llogout.php?webtag=EE">Login</a></h4> <h6>© 2024 <a href="http://www.beehiveforum.net/" target="_blank">Project Beehive Forum</a></h6> </body>