Full Version: Help!
From: Constant [#9]
1 Oct 2006
To: BrianC (INKSQUIRTER) [#1] 1 Oct 2006
Hi Brian
Try this CDR File
Let me know
Regards Constant
:O
From: bobkat [#10]
1 Oct 2006
To: BrianC (INKSQUIRTER) [#8] 1 Oct 2006
Divide your circle into 13 segments 360/13=27.692. That is the included angle of each segment. Draw a 10" circle with a 5" vertical line extending from the center to the top. Change the centerpoint of the vertical line to the same center point as the circle, then go to ARRANGE-TRANSFORMATIONS-ROTATE Tab. Enter the angle (27.692), click "apply to duplicate" several times. Your circle is now divided into 13 equal segments.
From: BrianC (INKSQUIRTER) [#11]
1 Oct 2006
To: bobkat [#10] 1 Oct 2006
Thanks! I had all the measurements to get the angle but just couldn't git er done....a bow to you sir!
From: BrianC (INKSQUIRTER) [#12]
1 Oct 2006
To: Constant [#9] 1 Oct 2006
Thank You Constant,
Everyone was a big help.....this was something I knew how to do and forgot.....the mind is a terrible thing to waste.
From: BrianC (INKSQUIRTER) [#13]
1 Oct 2006
To: ALL
Thank You everyone for your help!
The final result attached....
Show messages: All
1-8
9-13