What's the best way to handle this job? - Engraving Etc. Forum

<body> <h1>Full Version: <a href="https://www.engravingetc.org:443/archive/index.php?webtag=EE&msg=5722.4">What's the best way to handle this job?</a></h1><a name="a5722_4"></a><p><b>From: UncleSteve</b> [<a href="lmessages.php?webtag=EE&msg=5722.4">#4</a>]<br /> 10 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.1">#1</a>] 10 Jan 2007</p> Do they/you already have the boxes? If not, you may be able to order them from a promo products supplier. The 2k quantity should meet any minimums.<br /> <br /> Screening is the only way I can think of since they are black to start with. <hr /><a name="a5722_5"></a><p><b>From: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.5">#5</a>]<br /> 10 Jan 2007<br /><b>To: UncleSteve</b> [<a href="lmessages.php?webtag=EE&msg=5722.4">#4</a>] 10 Jan 2007</p> <p>They have the boxes. These boxes will house some type of electronic devices when they are completed. My understanding is they will give me the empty boxes to have the logo put on them and then they will put the electronics in them. </p> <p>He will give me a couple of the boxes to play with. I was not sure how the oem transfer would hold up on the boxes. I'm also not sure of the application of the boxes, where they will go and how much handling they will recieve. These are questions I will need to ask.</p> <p>For 2,000 would screening be a cheaper application than using the oem transfer? </p> <p>Thanks Cindy</p><hr /><a name="a5722_6"></a><p><b>From: Mick</b> [<a href="lmessages.php?webtag=EE&msg=5722.6">#6</a>]<br /> 10 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.5">#5</a>] 11 Jan 2007</p> <p>How many colors are you talking about ?<br /> Also, what is the plastic (PVC/ABS/Acrylic etc)?</p><p class="edit_text">EDITED: 10 Jan 2007 by MICK</p> <hr /><a name="a5722_7"></a><p><b>From: RALLYGUY (RALLYGUY1)</b> [<a href="lmessages.php?webtag=EE&msg=5722.7">#7</a>]<br /> 10 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.5">#5</a>] 11 Jan 2007</p> Hi Again Cindy,<br /> <br /> <div class="quotetext" id="quote"><b>quote: </b></div><div class="quote">For 2,000 would screening be a cheaper application than using the oem transfer? </div><br /> <br /> It depends on a number of things....<br /> <br /> What do you think your time and materials are worth if you do them via oem transfer? It all depends on how efficient the whole decorating process is for you......<br /> <br /> Since the boxes are black you really need to add white if you are going full color, no matter what process you end up using. One option would be to have a white field screen printed on them and then applying oem transfer to that....You would have to test to verify ink adhesion, and then effects of heat on the plastic and screened ink, but that may work pretty well. Other than the cost of shipping, printing, and taking lots of labor in applying the transfers......<br /> <br /> <br /> We screen print 3 dimensional products like you have there regularly....but can't screen on that particular type of product in full color. The quantity seems large, but is not that big for pad printing (which would be your best full color option if the image area isn't too large)<p class="edit_text">EDITED: 11 Jan 2007 by RALLYGUY1</p> <hr /><a name="a5722_8"></a><p><b>From: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.8">#8</a>]<br /> 11 Jan 2007<br /><b>To: Mick</b> [<a href="lmessages.php?webtag=EE&msg=5722.6">#6</a>] 11 Jan 2007</p> <p>Plastic is ABS and the logo has two colors black but mostly red..</p> <p>Thanks Cindy</p><hr /><a name="a5722_9"></a><p><b>From: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.9">#9</a>]<br /> 11 Jan 2007<br /><b>To: RALLYGUY (RALLYGUY1)</b> [<a href="lmessages.php?webtag=EE&msg=5722.7">#7</a>] 11 Jan 2007</p> <p>I talked to a guy that does screen printing (we both use each others services when needed) he said this type of product could not be screen printed. I will look into pad printing but do not know anyone my area that does that. I will have to check around. I will also get some samples and see how they work with the oem transfer paper. My concern would be would this type of plastic hold up to the heat press? <br /> And how durable would this process be..</p> <p>Thanks for all the help in thinking this process thru..</p> <p>Cindy</p><hr /><a name="a5722_10"></a><p><b>From: sawdr73</b> [<a href="lmessages.php?webtag=EE&msg=5722.10">#10</a>]<br /> 11 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.9">#9</a>] 11 Jan 2007</p> <p>Cindy,<br /> I might be able to help you. I do some pad printing. I think you said the boxes are black and that the logo is black and red, mostly red. That may not work out too well since the red will not show up very well on black. Then how would you separate the black in the logo from the black substrate? I am willing to give it a try if you could send me a sample box to test ( also need the art work). </p> <p>I am in southwest Arkansas. Where in Mississippi?</p> <p>Mickey Parker<br /> Vital Signs<br /> McNeil, AR 71752<br /> <a href="mailto:mickey-parker@sbcglobal.net">mickey-parker@sbcglobal.net</a></p><hr /><a name="a5722_11"></a><p><b>From: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.11">#11</a>]<br /> 11 Jan 2007<br /><b>To: sawdr73</b> [<a href="lmessages.php?webtag=EE&msg=5722.10">#10</a>] 11 Jan 2007</p> <p>Mickey,<br /> Thanks for the offer. You brought up some valaid points. I think I need to discuss this with my customer again and go over some details.</p> <p>Will let you know if I need your offer.</p> <p><br /> Thanks Cindy</p><hr /><a name="a5722_12"></a><p><b>From: RALLYGUY (RALLYGUY1)</b> [<a href="lmessages.php?webtag=EE&msg=5722.12">#12</a>]<br /> 11 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.9">#9</a>] 11 Jan 2007</p> Did he say why screen printing wouldn't work? Do you have a picture of the boxes? <hr /><a name="a5722_13"></a><p><b>From: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.13">#13</a>]<br /> 11 Jan 2007<br /><b>To: RALLYGUY (RALLYGUY1)</b> [<a href="lmessages.php?webtag=EE&msg=5722.12">#12</a>] 11 Jan 2007</p> <p>Something about running one color letting that dry and then having to run the second color letting that dry and so forth. He suggented that pad printing would probley be the best way to handle this job, and he does not offer pad printing.</p> <p>I'm not sure as I personally don't do either process myself and don't know anything about the process. </p> <p>Thanks Cindy</p><hr /><a name="a5722_14"></a><p><b>From: Engravin' Dave (DATAKES)</b> [<a href="lmessages.php?webtag=EE&msg=5722.14">#14</a>]<br /> 11 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.9">#9</a>] 11 Jan 2007</p> <p>Cindy,</p> <p>We use Mulholland Plastics in Fort Worth, TX for pad printing. They do very nice wholesale pad printing and screen printing work. They have done some very odd shaped items we have presented them with. 800-726-1445</p><p class="edit_text">EDITED: 11 Jan 2007 by DATAKES</p> <hr /><a name="a5722_15"></a><p><b>From: Mick</b> [<a href="lmessages.php?webtag=EE&msg=5722.15">#15</a>]<br /> 11 Jan 2007<br /><b>To: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.8">#8</a>] 12 Jan 2007</p> <p>Cindy<br /> ABS is very easy to print using the OEM, I have only printed on white though. It will withstand the temp I use for OEM transfer.<br /> Mick</p> <hr /><a name="a5722_16"></a><p><b>From: cindy (ROBERTM)</b> [<a href="lmessages.php?webtag=EE&msg=5722.16">#16</a>]<br /> 12 Jan 2007<br /><b>To: Mick</b> [<a href="lmessages.php?webtag=EE&msg=5722.15">#15</a>] 12 Jan 2007</p> <p>Thanks for the reply. My customer will get me some samples to try with sooo we will see how it goes.</p> <p><br /> Cindy</p><hr /><p align="center">Show messages: <a href="lmessages.php?webtag=EE&msg=5722.1">All</a>  <a href="lmessages.php?webtag=EE&msg=5722.1">1-3</a>  4-16</p> <h4><a href="lthread_list.php?webtag=EE">Back to thread list</a> | <a href="llogout.php?webtag=EE">Login</a></h4> <h6>© 2024 <a href="http://www.beehiveforum.net/" target="_blank">Project Beehive Forum</a></h6> </body>