Epilog EXT problem - Engraving Etc. Forum

<body> <h1>Full Version: <a href="https://www.engravingetc.org:443/archive/index.php?webtag=EE&msg=6573.1">Epilog EXT problem</a></h1><a name="a6573_1"></a><p><b>From: rj (RANDYJOYCE)</b> [<a href="lmessages.php?webtag=EE&msg=6573.1">#1</a>]<br /> 7 Apr 2007<br /><b>To: ALL</b></p> <p>My EXT is having problems. I have run acrylic samples 1 up for a customer and I have their approval to do 1250 pieces. I have set up the design to run 21 up. </p> <p>The first time I tried to run the job 15 up it stopped on the second line of copy with a x axis disabled message. The clock continues to run but no key other than stop and go seems to have any effect. I had to turn off laser and back on. Each time it booted up and gave the x axis disabled message. On the third time it did not. It has run 3 successive times and stopped at different places in the first or second line. </p> <p>I have shut down the computer, network switch adn laser all at once but it doesn't make any difference. Any ideas?</p> <hr /><a name="a6573_2"></a><p><b>From: Cody (BOBTNAILER)</b> [<a href="lmessages.php?webtag=EE&msg=6573.2">#2</a>]<br /> 7 Apr 2007<br /><b>To: rj (RANDYJOYCE)</b> [<a href="lmessages.php?webtag=EE&msg=6573.1">#1</a>] 7 Apr 2007</p> <p>Does the head move freely left and right? It sounds to me like your X-axis motor may be getting in a bind.</p> <p>We just have the TT, so I'm not familiar with the big machines.</p><hr /><a name="a6573_3"></a><p><b>From: rj (RANDYJOYCE)</b> [<a href="lmessages.php?webtag=EE&msg=6573.3">#3</a>]<br /> 7 Apr 2007<br /><b>To: Cody (BOBTNAILER)</b> [<a href="lmessages.php?webtag=EE&msg=6573.2">#2</a>] 7 Apr 2007</p> Think I am on the trail to a fix. I will confirm monday because it may be a common problem to the whole line then I will post. Thanks fro the response! <hr /><a name="a6573_4"></a><p><b>From: Stunt Engraver (DGL)</b> [<a href="lmessages.php?webtag=EE&msg=6573.4">#4</a>]<br /> 7 Apr 2007<br /><b>To: rj (RANDYJOYCE)</b> [<a href="lmessages.php?webtag=EE&msg=6573.3">#3</a>] 8 Apr 2007</p> Randy,<br /> <br /> Looking forward to the thrilling (successful) conclusion. :-) <hr /><a name="a6573_5"></a><p><b>From: Cody (BOBTNAILER)</b> [<a href="lmessages.php?webtag=EE&msg=6573.5">#5</a>]<br /> 7 Apr 2007<br /><b>To: rj (RANDYJOYCE)</b> [<a href="lmessages.php?webtag=EE&msg=6573.3">#3</a>] 8 Apr 2007</p> <p>Do we really have to wait until Monday???????</p> <p>Test it tonight....there's still time!!!!!</p> <p>ARRRGGGGHHHH..........if only I was a patient man.</p><hr /><h4><a href="lthread_list.php?webtag=EE">Back to thread list</a> | <a href="llogout.php?webtag=EE">Login</a></h4> <h6>© 2024 <a href="http://www.beehiveforum.net/" target="_blank">Project Beehive Forum</a></h6> </body>