Corian paint fill - Engraving Etc. Forum

<body> <h1>Full Version: <a href="https://www.engravingetc.org:443/archive/index.php?webtag=EE&msg=6579.2">Corian paint fill</a></h1><a name="a6579_2"></a><p><b>From: Stunt Engraver (DGL)</b> [<a href="lmessages.php?webtag=EE&msg=6579.2">#2</a>]<br /> 9 Apr 2007<br /><b>To: Lynn (LYNNDENO)</b> [<a href="lmessages.php?webtag=EE&msg=6579.1">#1</a>] 9 Apr 2007</p> Lynn,<br /> <br /> I would think an oil-based enamel, or automotive paint, would be the most durable. <hr /><a name="a6579_3"></a><p><b>From: Goodvol (JIMGOOD)</b> [<a href="lmessages.php?webtag=EE&msg=6579.3">#3</a>]<br /> 9 Apr 2007<br /><b>To: Lynn (LYNNDENO)</b> [<a href="lmessages.php?webtag=EE&msg=6579.1">#1</a>] 9 Apr 2007</p> <p>Lynn,</p> <p>I have asked a similar question on the Sawmill Creek forum and Keith Outten, who does a lot of Corian, has suggested using Dupont color adhesives to color fill the text. They will never fade and will never need maintenance according to Keith.</p> <p>I hope this helps.</p> <p>Jim</p><hr /><a name="a6579_4"></a><p><b>From: Laser Image (LASER_IMAGE)</b> [<a href="lmessages.php?webtag=EE&msg=6579.4">#4</a>]<br /> 9 Apr 2007<br /><b>To: Lynn (LYNNDENO)</b> [<a href="lmessages.php?webtag=EE&msg=6579.1">#1</a>] 9 Apr 2007</p> <p>I would suggest you take it to your local corian shop and ask them to color fill it for you. They will use the same material the corian is made from and it will last forever - it becomes part of the corian, not a coating on top of it. Any other paint has the possibility of coming out, chipping, etc., because it is going to flex differently than the corian when exposed to the weather outside.</p> <p>Gary</p><hr /><a name="a6579_5"></a><p><b>From: Cap'n Ron (RONSTROWGER)</b> [<a href="lmessages.php?webtag=EE&msg=6579.5">#5</a>]<br /> 9 Apr 2007<br /><b>To: Laser Image (LASER_IMAGE)</b> [<a href="lmessages.php?webtag=EE&msg=6579.4">#4</a>] 9 Apr 2007</p> <p>Lynn,<br /> The corian color fill is the perfect solution for outside as Gary suggests. Be sure to do a small sample first so you can figure the appropriate settings on you laser for depth. Because it is a catalyzed filler, you have about 15 minutes per the instructions to get it into the voids of the engraving before it hardends. You will have a slight raised surface of filler above the original piece that you will want to sand down. Finish with fine sand paper and buff. This I'm sure could all be done with the corian jobber. This is a fun way to do custom logo cutting boards for the catering and restrant trades.</p> <hr /><p align="center">Show messages: <a href="lmessages.php?webtag=EE&msg=6579.1">All</a>  <a href="lmessages.php?webtag=EE&msg=6579.1">1</a>  2-5</p> <h4><a href="lthread_list.php?webtag=EE">Back to thread list</a> | <a href="llogout.php?webtag=EE">Login</a></h4> <h6>© 2024 <a href="http://www.beehiveforum.net/" target="_blank">Project Beehive Forum</a></h6> </body>